System Routing Table - TP-Link TL-WR840N User Manual

Chapter 4
4. Click Save.
You can also do the following operations to modify the current settings.
• Click Delete to delete the entry.
• Click Enable All to enable all the entries.
• Click Disable All to disable all the entries.
• Click Delete All to delete all the entries.
• Click Previous to view the information on the previous screen and
information on the next screen.

4. 12. 2. System Routing Table

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced Routing
in use.
• Destination Network
to which the static route is assigned.
• Subnet Mask - The Subnet Mask determines which portion of an IP address is the
network portion, and which portion is the host portion.
• Gateway - This is the IP address of the gateway device that allows for contact between
the Router and the network or host.
• Interface - This interface tells you whether the Destination IP Address is on the LAN &
WLAN (internal wired and wireless networks), or the WAN (Internet).
• Click Refresh to refresh the data displayed.
4. 13. Bandwidth Control
4. 13. 1. Control Settings
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Bandwidth Control
3. Configure the bandwidth as needed and click Save.
> System Routing Table, and you can view all the valid route entries
- The Destination Network is the address of the network or host
> Control Settings.
Next to view the
51