System Routing Table - TP-Link Archer C55 User Manual

Gateway - This is the IP Address of the gateway device that allows for contact between

the router and the network or host.
3. Select Enabled or Disabled for this entry on the Status drop-down list.
4. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
Click the Enable Selected button to enable the selected entries.
Click the Disable Selected button to disable the selected entries.
Click the Delete Selected button to delete the selected entries.
4.15.2

System Routing Table

Choose menu "Advanced Routing → System Routing Table", and then you can view the
System Routing Table in the next screen (shown in
all of the valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and
Interface will be displayed for each entry.
Destination Network - The Destination Network is the address of the network or host to

which the static route is assigned.
Subnet Mask - The Subnet Mask determines which portion of an IP address is the network

portion, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact between the

router and the network or host.
Interface - This interface tells you either the Destination IP Address is on the LAN & WLAN

(internal wired and wireless networks), or on the WAN (Internet).
Archer C55 AC1200 Wireless Dual Band Gigabit Router
the following figure
- 88 -
). System routing table views