ADF and scanner removals
ADF/scanner assembly removal
1
Remove the left cover. See
2
Remove the rear lower door. See
3
Remove the right cover. See
4
On the right side of the machine, remove the four (A) screws securing the ADF/scanner assembly to the machine.
5
Disconnect the two cables (B).
6
On the left side of the machine, remove the eight (C) screws securing the ADF/scanner assembly to the machine.
"Left cover removal (MX71x)" on page
"Rear lower door removal (MX81x)" on page
"Right cover removal (MX71x)" on page
Repair information
296.
306.
430
305.
7463