Interrupt With Flag Sensor (Adf 2Nd Scan) Removal - Lexmark MX81 series Service Manual

4
Remove the first scan roll drive gear (B).

Interrupt with flag sensor (ADF 2nd scan) removal

1
Remove the ADF front cover. See
2
Remove the ADF rear cover. See
3
Remove the ADF input tray. See
4
Remove the ADF lift tray. See
5
Unsnap the interrupt with flag sensor from the ADF frame.
Note: Use a flat-head screw driver to access and disengage the snaps (A) on the interrupt with flag sensor.
"ADF front cover removal" on page
"ADF rear cover removal" on page
"ADF input tray removal" on page
"ADF lift tray removal" on page
Repair information
468
443.
454.
445.
450.
7463