Using the printer control panel (MX81x)
Use the
1
Display
2
Home button
3
Sleep button
4
Keypad
5
Start button
6
Clear all / Reset button Reset the default settings of a function, such as copying, faxing, or scanning.
7
Stop or Cancel button
8
Indicator light
To
•
View the printer status and messages.
•
Set up and operate the printer.
Go to the home screen.
Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep mode:
•
Touch the screen or press any hard button.
•
Open a door or cover.
•
Send a print job from the computer.
•
Perform a power‑on reset (POR) with the main power switch.
•
Attach a device to the USB port on the printer.
Enter numbers, letters, or symbols.
Start a job, depending on which mode is selected.
Stop all printer activity.
Check the status of the printer.
Service menus
226
7463