High Capacity Input Tray Option Removals (Mx810, Mx811, And Mx812); Hcit And Drawer Assembly Removal - Lexmark MX81 series Service Manual

8
To access the cable, lift the left side of the top plate, and pull the sensor assembly away from the drawer.
Note: Pay attention to the original routing of the cable.
9
Route the sensor cable off the drawer, and remove the sensor.
High capacity input tray option removals (MX810, MX811, and
MX812)

HCIT and drawer assembly removal

1
Push the latch sideward until it locks.
2
Lift the printer or drawer above it, and separate.
Repair information
554
7463