Lexmark MX81 series Service Manual page 85

3
Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4
Insert the tray.
5
To clear the message and continue printing, select Next >
24x paper jams
Error code Description
241.02 Sensor (input) early arriving jam
241.06 The media is late reaching the sensor (input)
within the specified time from tray 1
241.10 The media is late reaching the sensor (input)
within the specified time from tray 1
241.13 The media is late reaching the sensor (input)
within the specified time from tray 1
241.14 The media is late reaching the sensor (input)
within the specified time from tray 1
241.15 Media tray 1, tray pulled jam
241.20 Took too long to ramp up media feeder motor
in tray 1
241.21 Media feeder motor stall in tray 1
241.22 Media feeder motor pick motor under‑speed
in tray 1
241.24 Media feeder motor stalled on the last pick
attempt in tray 1
> Clear the jam, press OK >
Action
See "Sensor (input) early arriving jam service check" on page
58.
See "Sensor (input) never‑ or late‑arriving jam service check"
on page 59.
See "Sensor (input) never‑ or late‑arriving jam service check"
on page 59.
See "Sensor (input) never‑ or late‑arriving jam service check"
on page 59.
See "Sensor (input) never‑ or late‑arriving jam service check"
on page 59.
See "Media tray 1, tray pulled jam" on page
See "Media feeder motor control service check" on page
See "Media feeder motor control service check" on page
See "Media feeder motor control service check" on page
See "Media feeder motor control service check" on page
Diagnostic information
83
7463
.
85.
84.
84.
84.
84.