Installing The Seat - CYBEX ATON Q User Manual

a
q
20

INSTALLING THE SEAT

a
• Make sure that the carrying handle
position A. (see page 10)
• Place the seat against driving position on the car
seat. (The feet of the baby point in the direction of the
backrest of the car seat).
• CYBEX Aton Q can be used on all seats with a
three-point automatic retractor belt. We generally
recommend to use the seat in the back of the
vehicle. In the front, your child is usually exposed to
higher risks in case of an accident.
p
• Make sure that the horizontal marking on the safety
sticker
• Pull the three-point belt over the child seat.
• Insert the belt tongue into the car belt buckle q.
WARNING! The seat must not be used with a two-
point belt or a lap belt. When securing your child with
a two-point belt, this may result in injuries or death
of the child.
p is parallel to the floor.
a is in the upper