Graphics Configuration
–
Graphics Turbo IMON Current
Shows graphics turbo IMON Current values supported (14-31)
–
Primary Display
This item allows users to select which of IGFX/PEG/PCI Graphics device
should be Primary display or select SG for Switchable Gfx.
–
Internal Graphics
This item keeps IGD enabled based on the setup options.
–
Aperture Size
This item allows users to change Aperture Size.
–
DVMT Pre-Allocated
This item allows users to select DVMT 5.0 Pre-allocated (fixed) graphics
memory size used by the internal graphics device.
–
DVMT Total Gfx Mem
This item allows users to select DVMT 5.0 total graphic memory size used by
the internal graphics device.
–
Gfx Low Power Mode
This option is applicable for SFF only.
–
Panel Power Enable
This item allows users to enable or disable forcing of Panel Power in the
BIOS.
ECU-4784 User Manual
Figure C.32 Graphics Configuration
74