Installing A Usb Dongle - Advantech ECU-4784 Series User Manual

3.3

Installing a USB Dongle

The ECU-4784 Series provides a clamp for the USB dongle which can be installed
inside the chassis. Follow the steps to install the USB dongle and clamp:
1. Refer to section 3.1 to open the chassis.
2. Plug the USB Dongle in the upper port of CN14, note that the lower port is a
dummy port.
Figure 3.6 Open the chassis
Figure 3.7 CN14 Location of Internal USB Port
27 ECU-4784 User Manual