Figure C.12Super I/O Configuration - Advantech ECU-4784 Series User Manual

 Device power-up delay
This item allows users to select device power-up section.
Maximum time the device will take before it properly reports itself to the Host
controller. "Auto" uses a default value: for a Root port it is 100ms, for a Hub port
the delay is taken from the Hub descriptor.
USB2.0 FlashDisk1.00

This item allows users to select USB2.0 FlashDisk1.00 section.
Mass storage device emulation type. "Auto" enumerates devices according to
their media format. Optical drives are emulated as "CDROM" drives with no
media will be emulated according to a drive type.
C.2.2.8 Super IO Configuration
 COM Port 1 Configuration
This item allows user to set Parameters of COM Port 1.
 COM Port 2 Configuration
This item allows user to set Parameters of COM Port 2.
 Parallel Port Configuration
This item allows users to set Parameters of Parallel Port (LPT/LPTE).
 Hardware Monitor
This item allows user to change monitor hardware status.
 COM Port 1 Configuration
ECU-4784 User Manual
Figure C.12 Super I/O Configuration
56