Application Examples; Basic Wirings Of A Stand Alone Door Lock - Transmitter Solutions Dolphin DOLXP1KB Programming & Installation Manual

1) BASIC WIRINGS OF A STAND ALONE DOOR LOCK

NOTE:
Connect the 1N4004 as close as possible to the lock in parallel with the lock power terminals of the lock to
absorb the back EMF to prevent it from damaging the keypad. The 1N4004 is not required if the electric lock is AC
operated.
To avoid Electro-Static-Discharge from interfering with the operation of the keypad, always ground the (-)
terminal of the keypad to earth.
Always connect DOOR SENSOR terminal to (-) ground if not used.

APPLICATION EXAMPLES

37