Programming the Keypad The keypad will shut down for approx. 40 seconds if your entry code is not correct within a string of 18 digits. This will discourage an unauthorized person from trying use random numbers to access your property. STEP 1: Return to Default Setting 1.
Page 3
Preset Factory Codes User Enter Code 2 3 4 5 (Note: To reset the access code remove 9 volt battery form unit, Depress any key on the keypad and wait 10 seconds before installing battery. Send a signal to channel 1 of TX module: 2 3 4 5 (access code) Send a signal to channel 2 of TX module:...