Table of Contents
Advertisement
KEYPAD PROGRAMMING MAKE SIMPLE – For General Users
This is a multi purpose keypad. It has many functions for user's selection. For those general users taking the keypad
for door strike only, most of the features can be kept in their Default values. Only the User PINs and a private Master
Code are necessary to program for the system. The keypad accepts 1) Card only, 2) PIN only, 3) Card + PIN or 4) Card
+ Common User Code to operate its outputs.
PROGRAMMING
NOTE:
.
a) The
button is equivalent to the
b) Wait 1 minute until the end of the power up delay.
1) Set System into Programming Mode with The Factory Set Master Code 0 0 0 0
0000 **
---- 2 beeps, system is in Programming Mode
Note: If the Master Code is forgotten, use the DAP Code to set the system into programming mode. See DAP CODE
8080 on the previous page for the details.
2) Change The Factory Set Master Code to Owner's Private Master Code for Security Reason
01 3289 #
---- 2 beeps, 3 2 8 9 is a Master Code for example here only
3289 is the new Master Code and the 0000 is erased
3) Record an "EM Card" to Operate The Output 1 for Door Open
10
1
(a)
(b)
(a) 10 = Programming Location for Output 1
(b) 1 = Programming option for EM Card only
(c) 001 = One of the 1,000 User IDs for the User PIN/Card from 000-999
(d) Read Card = Put the Card close to the card reader
4) Set an "User PIN" to Operate The Output 1 for Door Open
10
2
002
(a)
(b)
(a) 10 = Programming Location for Output 1
(b) 2 = Programming option for User PIN only
(c) 002 = One of the 1,000 User IDs for the User PIN/Card from 000-999
(d) 8321 = The User PIN that is programmed for door open. 8321 is an User PIN for example here
only
5) Record an "EM Card + User PIN" to Operate The Output 1 for Door Open
10
3
(a)
(b)
(a) 10 = Programming Location for Output 1
(b) 3 = Programming option for EM Card + User PIN. (The User PIN can be repeated use or
proprietary)
(c) 003 = One of the 1,000 User IDs for the User PIN/Card from 000-999
(d) Read Card = Put the Card close to the card reader
*
button in the keypad with bell button.
001
R E A D
(c)
(d)
8321
(c)
(d)
003
R E A D
(c)
(d)
#
(e)
#
(e)
6123
#
(e)
(f)
12
Hide quick links:
Advertisement
Table of Contents
