Related Manuals for Transmitter Solutions Dolphin DOLXFD1000B-M
Summary of Contents for Transmitter Solutions Dolphin DOLXFD1000B-M
- Page 1 DOLXFD1000B-M/S V.1.19.18 Mullion or Single Gang Keypad with Card Reader -40°+140° IP66 866.975.0101 866.975.0404 www.transmittersolutions.com...
- Page 3 The DOLXFD1000BS/DOLXFD1000BM is a single door mulifunction stand alone access controller or a Wiegand output reader. It uses Atmel MCU assuring stable performance. The operation is very user-friendly, and low-power circuit makes a long service life. The DOLXFD1000BS/DOLXFD1000BM supports 1,000 users (998 common users + 2 panic users), all user data can be transferred from one to another.
- Page 4 DOLXFD1000BS DOLXFD1000BM...
- Page 5 DOLXFD1000BS DOLXFD1000BM...
- Page 7 Notes: the DOLXFD1000BS/DOLXFD1000BM has 3 working modes: Stand alo Mode, Controller Mode, Wiegand Reader Mode, choose the mode you would like to use. (Factory default is Stand alone Mode / Controller Mode.) The DOLXFD1000BS/DOLXFD1000BM can be worked as Stand alone Reader for a single door.
- Page 8 DOLXFD1000BS/DOLXFD1000BM...
- Page 11 For Multi cards/PINs access mode, the interval time of reading cards/inputting PINs can not exceed 5 seconds, or else, the DOLXFD1000BS/DOLXFD1000BM will exit to standby automatically.
- Page 13 The DOLXFD1000BS/DOLXFD1000BM can be work as a Controller, connected with the external Wiegand reader. (Factory default mode)--7 2 #...
- Page 14 DOLXFD1000BS/DOLXFD1000BM The DOLXFD1000BS/DOLXFD1000BM connected with External Card Reader: - If EM card reader of HID card reader: users can be added/deleted on either the DOLXFD1000BS/DOLXFD1000BM or external reader. - If Mifare reader: users can only be added/deleted on external reader.
- Page 15 The DOLXFD1000BS/DOLXFD1000BM connected with Fingerprint Reader: For example: Connect F2 as the fingerprint reader to the DOLXFD1000BS/DOLXFD1000BM, it is of two steps to enroll the valid fingerprint. Step 1: Add the Fingerprint (A) on F2 Step 2: Add the same Fingerprint (A) on the DOLXFD1000BS/DOLXFD1000BM The DOLXFD1000BS/DOLXFD1000BM connected with Keypad Reader: The keypad reader can be 4 Bits, 8 Bits (ASCll), or 10 Bits output format.
- Page 16 DOLXFD1000BS/DOLXFD1000BM...
- Page 17 User Information Transfer: The DOLXFD1000BS/DOLXFD1000BM supports the Use Information Transfer function, and the enrolled user (cards, PINs) can be transferred from one (let’s name it master unit) to another (let’s name it accept unit) DOLXFD1000BS/DOLXFD1000BM DOLXFD1000BS/DOLXFD1000BM...
- Page 18 Interlock: The DOLXFD1000BS/DOLXFD1000BM supports the Interlock function. It is two keypads for two doors, and mainly used for banks, prisons and other places where a higher level secuirty is required. DOLXFD1000BS/DOLXFD1000BM DOLXFD1000BS/DOLXFD1000BM...
- Page 19 This warranty shall begin on the date the keypad is manufactured. During the warranty period, the product will be,repaired or replaced (at the sole discretion of Transmitter Solutions) if the product does not operate correctly due to a defective component. This warranty does not extend to (a) the keypad case, which can be damaged by conditions outside the control of Transmitter Solu- tions, or (b) battery life of the keypad.
- Page 20 2480 South 3850 West, Suite B Salt Lake City, UT 84120 (866) 975-0101 • (866) 975-0404 fax www.transmittersolutions.com...