Table of Contents
Advertisement
RECORD-DELETE USER PINS OR CARDS FOR OUTPUT 1, 2, & 3
Total of 1,200 User PINs and/or Cards are available for the 3 user groups to control the 3 outputs.
1) 1,000 ---- for Output 1 (Group 1)
2) 100 ------ for Output 2 (Group 2)
3) 100 ------ for Output 3 (Group 3)
The Private User PINs and Cards in the 3 user groups
PINS in the "EM Card + Secondary User PIN" can be repeated.
USER GROUP LOCATIONS
– Group 1 --For User PINs/Cards Controlling Output 1
10
1,000 Users are allowed in group 1 for O/P 1
– Group 2 --For User PINs/Cards Controlling Output 2
20
100 Users are allowed in group 2 for O/P 2
– Group 3 -- For User PINs/Cards Controlling Output 3
30
100 Users are allowed in group 3 for O/P 3
SELECTION OF OPERATION MEDIA
Number 1, 2, 3 or 4 represents the Media to be used to operate the keypad.
Number 5 is the authorization code for deleting of an PIN and/or Card from
its User ID.
1
= EM Card only;
3
= EM Card + Secondary User PIN
5
= Delete an User PIN &/or Card from the selected User ID number
0999
= Clear all the PINs & Cards from the selected Location.
It takes few seconds to a minute to complete depending
on the Location selected and the data stored.Please see
the programming example below for the details.
USER ID NUMBER
A 3-digit ID is an identified number for each User PIN.
Repeated ID number will be rejected by the system
000
a) ID Number
001
b) ID Number
001
c) ID Number
CARD &/OR USER PINS
The User PINs can be 4-8 digits. Key in the User PIN on each ID Number box, then confirm it with # key.
Just simply put the EM card close to the reader window to read it on each ID Number box, then, confirm it with
Card ONLY, or Card + Common User PIN entry. The Common User PIN is NOT required to
# key if it is a
key-in here. It will go into its location automatically after the Card is read.
Read the Card first, then key in the Secondary User PIN on each ID number box, then confirm it with # key if it is a
Card + Secondary User PIN. The Secondary User PINs can be duplicated or a proprietary User PIN but can not
be a duplicate of a Prime Code. Owner can use the same secondary User PIN for a group of Cards as a group
Common User Code (or called Department Code) for a specific relay output.
Cards (Operation Media # 1, 3, & 4) and Private User PINs (Operation Media 2) MUST be unique. A repeated EM
card or Private User PIN will be rejected and one long beep will be generated by the system to notify the owner.
LOCATIONS
RECORD/DELETE
10
30 2
5 000
-
or
2
= Private User PIN only;
4
= EM Card + Common User PIN
999
-
for 1,000 User PINs to operate Output 1
100
-
for 100 User PINs to operate Output 2
100
-
for 100 User PINs to operate Output 3
MUST be unique. Repeated PINs will be rejected. Secondary User
USER ID
999
#
-
17
(Locations 10, 20 & 30)
USER PIN
VALIDATION
USER PIN
Hide quick links:
Advertisement
Table of Contents
