Transmitter Solutions Dolphin DOLXP1KB Programming & Installation Manual page 32

Vandal resistant back-lit weatherproof access control key and card reader pwith wiegand output & apo data i/o
Table of Contents

Advertisement

THE 26 BIT WIEGAND DATA OUTPUT FROM THE EM CARDS
Even parity
the trailing parity bit is an Odd parity bit from the last 12 bits. The data transmitted is in Binary codes
for the Card reading.
Example 1: Wiegand Output of Reading An EM Card
Each EM card or Keyfob is marked with an unique ID in Decimal Digits that is the code read by the
reader. The EM card is also marked with a "3 digit+5 digit" code that does not belong to this system
and can be ignored.
a) The Code Marked on One of The EM Cards :
0006613779
008,18789
The ID Code to be read for Wiegand Output
The Code does not belong to this
system
The Code in Decimal Number : 6 6 1 3 7 7 9
The Code 6 6 1 3 7 7 9 Equivalent to Hex Number : 6 4 E B 1 3
b) Each Hex Number Consists of 4 Bits, Total 26 Bits of Wiegand Data Output from Card Reading:
E 6 4 E B 1 3 O
An Even Parity Bit of 6 4 E = 0
An Odd Parity Bit of B 1 3 = 1
c) The 26 bits Wiegand data sending out in Binary after reading of the card:
0 0 1 1 0 0 1 0 0 1 1 1 0 1 0 1 1 0 0 0 1 0 0 1 1 1
NOTE:
considered of reading a Card. The keypad provides Wiegand Data output for the Card only and the
User PINs attached are NOT taken into account for the Wiegand output.
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents