Record A Master Code; Record A Super User Pin - Transmitter Solutions Dolphin DOLXP1KB Programming & Installation Manual

Example:
User Name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
--

RECORD A MASTER CODE

MASTER CODE
Master Code is the authorization code for setting the system to programming mode. It is NOT an User Code
operating of the output relays.
The Master Code can be 4 to 8 digits. Press # key to confirm code entry
When a new master code is keyed in and confirmed, the old master code is replaced automatically.
The master code is also the Link-up Code between the keypad and the optional controller of the system in Split-
decoded operation.
Example: Set a Master Code with the number of "2 2 3 3" ----

RECORD A SUPER USER PIN

The Super User PIN has TWO functions. It is prepared for the owner to simply use only one User PIN to operate the
three outputs of the keypad and make operation inhibit enable / disable to the system outputs.
SUPER USER PIN
The Super User PIN can be 4 to 8 digits.
Two beeps will be heard after pressing the # key to confirm code entry.
When a new Super User PIN is keyed in and confirmed, the old one is replaced.
Example: Set a Super User PIN with the number of "2 5 8 0" ----
To deleted a Super User PIN from memory: Key in just the Location number and #. ----
Location Function Code
LOCATION
01
LOCATION
02
User ID PIN/Code
MASTER CODE
4 to 8 Digits
01 2233 #
SUPER USER PIN
4 to 8 Digits
02 2580 #
15
Card # Remark
(Location 01)
VALIDATION
#
(Location 02)
VALIDATION
#
02 #