Operation And Functions Of The Super User Pin - Transmitter Solutions Dolphin DOLXP1KB Programming & Installation Manual

OPERATION AND FUNCTIONS OF THE SUPER USER PIN

1) Operate Output 1, 2, and 3
The operation of the Super User PIN is just like a normal User PIN. Simply key-in the PIN with a specific output number for
the desired Output. The Super User PIN can also be used to reset an operating output timer instantly.
SUPER USER PIN
SUPER USER PIN
SUPER USER PIN
2) Inhibit The User PINs For Output 1
The Super User PIN can also be used to inhibit the normal User PINs/Cards for the Output 1 (usually they are for
door strike). It enhances the security level of the access control system, such as to stop a keypad after office
hour or while the house is nobody inside. Once the Output 1 is inhibited, the User PINs/Cards for it become invalid
and those people even know the User PINs are refused during the system is inhibited. The inhibit function is toggled
in Start / Stop mode with the following code entry.
SUPER USER PIN
NOTE:
The inhibit function setting with the Super User PIN applies to the whole group of User PINs and Cards for
ONLY ,
Output 1
For safety reason, the inhibit function initiated with the Super User PIN does not govern the Egress Button. The
door still can be opened with it from inside.
The Super User PINs are always valid. They are not governed by any inhibit or lock-out function in the system.
RECORD THE COMMON USER PINS FOR OUTPUT 1, 2 & 3
The Common User PINs 1, 2 and 3 are prepared for operating of the Output 1, Output 2 and Output
3 respectively as an enhance code. The Common User PINs MUST work in the form of "Card + Common
PIN" to operate the outputs to increase the security of the access control system. See Locations 10, 20
& 30 for more information.
NOTE : Common User PIN alone can NOT be used to operate the Outputs directly.
03
04
05
COMMON USER PIN LOCATIONS
-- Location Stores The Common User PIN for Output 1
-- Location Stores The Common User PIN for Output 2
-- Location Stores The Common User PIN for Output 3
COMMON USER PINS
# 1
---------- Output 1 Activates or Output 1 Resets
# 2
---------- Output 2 Activates or Output 2 Resets
# 3
---------- Output 3 Activates or Output 3 Resets
# 9
---------- The Whole Group of User PINs & Cards for Output 1 are Disabled
or Enabled in Toggle
but not for Output 2 or Output 3.
LOCATIONS
03
COMMON USER
05
- 4 to 8 Digits
16
(Locations 03, 04, & 05)
VALIDATION
#
.