Table of Contents
Advertisement
4) Example 4 -- EM Card + Common User PIN :
i) Programming :
10 4
003
(a)
(b)
(c)
(a) The card is programmed for operating of the Output 1
(b) The operation is "EM Card + Common User PIN"
(c) Take ID number 003 in Group 1 to store the card, which is one of the IDs in 000-999
(d) Put the card close to the reader. One beep confirms the reading. (No need to key in a Common User PIN but
MUST
there
be a Common User PIN already recorded in Location 03; (or 04, 05 if for O/P 2, O/P
(e) Press # to store the "Card" into memory. Two-beep confirms a valid entry
ii) Operation : (while the system is back to operation mode)
R e a d
C o m m o n U s e r
(a)
a) Put the EM card close to the reader. One-beep confirms the reading and 30 seconds waiting time is given for the
entry of the Common User PIN, the Amber LED keeps flashing.
b) Key in the Common User PIN "1 3 5 7" (the number programmed in "Location 0 3" for Output 1 in the previous Example)
c) Confirm it with the # key. Output 1 activates.
5) Example 5 -- Delete an User PIN & / or EM Card (for O/P 1, 2 or 3) :
i) Delete An User PIN or A Lost EM Card
10
5
(a)
(b)
a) Key in the User Group that the User ID belongs to. "10" for the Group 1, "20" for the Group 2, and "30" for the Group 3
b) Key in "5" that is the Command Code for making a deletion here
c) Key in the User ID that stored the User PIN, the lost EM card or the EM Card+User PIN
d) Press the # key. Two-beep confirms a valid entry and the PIN and/or Card in that User ID is cleared
ii) Delete an EM Card
10
5
R e a d
(a)
(b)
a) Key in the User Group that the EM Card belongs to. "1 0" for the Group 1, "2 0" for the Group 2, and "3 0" for the
Group 3
b) Key in "5" that is the Command Code for making a deletion here
c) Put the EM card close to the reader. One-beep confirms the reading. Read the Card only also makes a valid
deletion to the Card working with the Common User PIN or the Secondary User PIN
d) Press the # key. Two-beep confirms a valid entry. The EM Card in that USER ID is cleared. Key in the User ID is
not required.
6) Example 6 – Clear The Whole Group of Users :
Whole group of users including the PINs and Cards can be cleared with the following command.
10
0999
(a)
(b)
a) The User Group 1 – " 10 " is selected to be cleared. " 20 " for Group 2 & " 30 " for Group 3
b) Key in the Group Deletion Command,
c) Confirm the deletion with #. All the User PINs and Cards in the Group 1 are cleared. It takes few seconds to a
minute to complete depending on the data stored.
#
R e a d
(d)
(e)
#
(b)
(c)
#
User ID
(c)
(d)
#
(c)
(d)
#
(c)
0 9 9 9
19
Hide quick links:
Advertisement
Table of Contents
