Advertisement
Located on the DOL1000-MF's circuit board, the red Master Reset Button is used to reset the master
code back to 1234. The following steps will reset the master code:
1. Remove the battery or eliminate the power source to the DOL1000-MF and wait for 30
seconds for the keypad to completely power off.
2. Press and hold the red Master Reset Button.
3. While holding the red Master Reset Button, reconnect the battery or power source to the
DOL1000-MF.
4. Continue to hold the red Master Reset Button until the keypad beeps 3 times. This will indicate
that the Master Code has been reset to 1234.
INSTALLATION EXAMPLES
Dip switch with battery example:
• NOTE: Be sure to connect the power source to the correct terminals! The battery terminals
and the AC/DC terminals are different.
RESETTING THE KEYPAD AND MASTER CODE
Advertisement
