1. Packing List
Name
Digital Keypad-BC-2010
User manual
Screw driver
Rubber bungs
Self tapping screws
Please ensure that all the above contents are correct. If any are missing please notify the
supplier of the BC-2010.
2.
BC-2010 Quick Reference Programming Guide
To enter the programming mode
To exit from the programming mode
Note that to undertake the following programming the master user must be logged in
To change the master code
To add a PIN user.
To add a card user
To delete a PIN or a card user.
To unlock the door for a PIN user
To unlock the door for a card user
Quantity
Remarks
1
1
1
4
6*27mm, used for fixing
4
3.5*27mm, used for fixing
*
Master code
888888 is the default factory master code
*
0
New code
The master code can be 6 to 8 digits long
1
User ID number
The ID number is any number between 1 & 1500. The
PIN is any four digits between 0000 & 9999 with the
exception of 1234 which is reserved. Users can be added
continuously without exiting programming mode
1
Read Card
Cards can be added continuously without exiting
programming mode
2
User ID number
2
Read Card or Card ID number
Users can be deleted continuously without exiting
programming mode
Enter the PIN then press #
Present the card
2
#
#
New code
#
#
PIN #
#
# for a PIN user or
# for a card user