Maintenance - FARFISA INTERCOMS FT 105P Installation, Programming, And User's Manual

FT
105P
208P
No parts of the PABX can be replaced directly by the user.
In case of failure, contact the nearest Farfisa Service Center or distributor.
In the meantime, the PABX can be operated in emergency mode (see next chapter), by
placing the switch on O.
I
N
In case of power failure, the following lines can be used to make/receive calls:
S
An EEPROM memory guarantees the preservation of the general programming data (or
T
system data) and restore them when the power is restored.
A
Supply voltage (+6 ÷ -10%):
L
Maximum power consumption:
Power consumption in stand-by:
Input protection fuse:
L
Maximum distance of an extension line
with 0.6 mm
Dimensions:
Weight:
A
Operating temperature:
Maximum humidity permitted:
Number of external lines:
T
Number of extension lines:
Number of DTMF receivers:
Simultaneous internal conversations:
Simultaneous external conversations:
I
Paging communication:
Intercom calls (additional card):
Preservation of data in case of power failure:
O
Extension lines in emergency mode:
Extension line for facsimiles, modems, answering machines: 45 *
Microprocessor control with recorded program
N
Solid-state switching matrix
2-wire internal telephone network
* The other extension lines can also be used but in this case. The use of the general call
function is not recommended.
for FT105P
for FT208P
TECHNICAL DATA
2
telephone pair:

MAINTENANCE

EMERGENCY
extension 41
extension 41 for external line 1
extension 42 for external line 2
4
FT105P FT208P
230V 230V
16W 18W
10W 10W
0,315A 0,315A
350m 350m
226x254x66 226x254x66
1.3 Kg 1.4 Kg
0°÷40°C 0°÷40°C
85%RH 85%RH
1 2
5 8
1 2
2 2
1 2
1 1
1 o 2 1 o 2
EEprom EEprom
41 41 e 42
48 *