Inclusion - FARFISA INTERCOMS FT 105P Installation, Programming, And User's Manual

FT
HOW TO PUT THE EXTERNAL/INTERNAL LINE IN HOLD-ON
105P
208P
This function allows for putting the external/internal user in hold-on during the conversa-
tion.
Operation
O
During the conversation
press FLASH (dialling tone)
- the line is put in hold-on and the user hears:
- music in case of external conversation
P
- hold-on tone in case of internal conversation
press FLASH to resume the user in hold-on.
Notes
In case of external outgoing calls, the line can be put in hold-on only after 10 seconds
E
from the last digit dialled.
Put the call in hold-on and hang up. If no call is received and no conversation is in
progress, the telephone rings for 25 seconds to remind the operator of the hold-on call.
After that, the call is cleared.
R
A
T
This function allows for an extension to overlap during a conversations between an
extension and the external line (or between 2 extensions).
Operation
I
The called user is busy because of an
external/internal call.
After the busy tone:
press FLASH
O
dial 5
- the user overlaps the conversation
- all users hear the inclusion tone
The three users can start the conversation.
N
Note: this service must be previously
programmed (see page 6)

INCLUSION

Flash+5
2 2
Flash