Operation - FARFISA INTERCOMS FT 105P Installation, Programming, And User's Manual

When programming or operating the PABX, in case of telephones with LD dialling use
number 1 instead of the FLASH.
HOW TO RECALL OPERATING MODES
DAY service recalling
Allows for operating each telephone in day service (according to the specific program-
ming).
NIGHT service recalling
Allows for operating each telephone in night service (according to the specific program-
ming).
The extensions can install an internal communication.

Operation

pick up the handset (dialling tone);
dial the extension number desired (from 41 to 48 for FT208P; from 41 and 45 for
FT105P);
- call control tone if the extension is free
- busy tone if the extension is busy; after 5 sec. the PABX sends the call incoming tone
to the busy extension and the call control tone to the calling extension. The busy
extension can use the "ANSWER UPON CALL INCOMING TONE" service (or hang
up and wait for the telephone ring).
the extension called picks up the handset to start conversation
at the end of the conversation, hang up
- as soon as one extension hangs up, the other extension receives the dissuasion tone.
OPERATING INSTRUCTIONS
3333-01 (base)
3333-00
INTERNAL COMMUNICATIONS
1 9
FT
105P
208P
O
P
E
R
A
T
I
O
N