FARFISA INTERCOMS FT 105P Installation, Programming, And User's Manual page 17

Example FT208P: if the following code has been dialled:
33331711001001
- external lines has DTMF dialling. The warning tone reminding the end of the LD dialling
time is disabled.
- intercom call no. 1 lasts 5 sec, while intercom call no. 2 lasts 25 sec.
- the D.I.S.A. function is enabled for external line 2, but not for external line 1.
Table FT105P
0 LD dialling of extensions on external line
1 DTMF dialling of extensions on external line
0 disables warning tone to remind the end of LD dialling time on
external line
1 enables warning tone to remind the end of LD dialling time on
external line
3333-17 _ _ _
Code Numbers to be dialled
To program:
pick up the handset (dialling tone);
dial the access code 333317;
dial 5 digits to program the requested general services (see Table). Always dial a
number of 5 digits even if some services remain unchanged.
wait for the acknowledgement tone and hang up.
Example FT105P: if the following code has been dialled:
33331710101
- external line has DTMF dialling. The warning tone reminding the end of the LD dialling
time is disabled.
- intercom call no. 1 lasts 5 sec, while intercom call no. 2 lasts 25 sec.
- the D.I.S.A. function is enabled
Notes
- If the intercom card (art. ES60 or ES65) is not present, either 0 or 1 can be inserted when
programming the duration of the intercom call.
- In case of DTMF lines, use only DTMF telephones.
0 intercom call no. 1 (terminal 6a) lasts 25 sec.
1 intercom call no. 1 (terminal 6a) lasts 5 sec.
0 intercom call no. 2 (terminal 6b) lasts 25 sec.
1 intercom call no. 2 (terminal 6b) lasts 5 sec.
0 disables D.I.S.A. over external line
1 enables D.I.S.A. over external line
_ _ 10000
Base
1 5
FT
105P
208P
P
R
O
G
R
A
M
M
I
N
G