Numbers - FARFISA INTERCOMS FT 105P Installation, Programming, And User's Manual

FT
HOW TO ACTIVATE THE SEQUENCE OF ENABLED NUMBERS
105P
208P
This function allows for enabling max. 8 sequences of numbers (from 1 to 8 digits) with
which the telephone number must start in order to overcame the dialling control. Fill-in
with the chosen numbers the table on page 46.
P
The access codes for this service are:
3333-30, 3333-31, 3333-32, 3333-33, 3333-34, 3333-35, 3333-36 and 3333-37.
To insert the enabled numbers:
R
pick up the handset (dialling tone);
dial the access code 333330;
dial a number from 1 to 8 digits (fill-in with the number the table on page 46),
- if the number is made up of 8 digits, wait for the acknowledgement tone and hang up.
O
- if the number has less than 8 digits, hang up after dialling the last digit, without waiting
for the acknowledgement tone.
To insert the other numbers, repeat the same procedure using a different access code.
G
R
A
Example: if the following codes have been dialled:
M
333330071, 3333310187, 33333206854
function is enabled (see page 18) can only make calls to numbers starting with 071, 0187
and 06854.
M
I
N
G
FT105P 333330xxxxxxxx
FT208P 333330xxxxxxxx
333331xxxxxxxx
333331xxxxxxxx
the telephones for which the dialling control
1 6
333337xxxxxxxx
333337xxxxxxxx