How To Control The Area Code Dialling - FARFISA INTERCOMS FT 105P Installation, Programming, And User's Manual

HOW TO CONTROL THE AREA CODE DIALLING

This function allows for blocking max. 8 sequences of numbers (from 1 to 8 digits) dialled
as first digits a telephone number. Fill-in the table of the page 46.
The access codes for this service are:
To insert the blocking number:
pick up the handset (dialling tone);
dial the access code 333322;
dial a number from 1 to 8 digits (fill-in with the number the table on page 46),
- if the number is made up of 8 digits, wait for the acknowledgement tone and hang up.
- if the number is made up of less than 8 digits, hang up after dialling the last digit,
without waiting for the acknowledgement tone.
To insert the other blocking numbers, repeat the same procedure using a different access
code.
FT105P 333322xxxxxxxx
FT208P 333322xxxxxxxx
Example: if the codes indicated below have been dialled:
333322166, 333323033, 33332400158661 the telephones for which the area code dialling
control is enabled (see next paragraph) cannot dial numbers starting with 166, 033 and
00158661.
HOW TO DELETE THE ENABLED NUMBERS AND THE AREA CODES
To delete the enabled numbers and the area codes (see pages 16 and 17):
pick up the handset (dialling tone);
dial the access code of the number to be deleted;
hang up.
Example: dial 333335 and hang up to delete the number stored in position 35 of the enabled
numbers.
3333-22, 3333-23, 3333-24, 3333-25, 3333-26,
3333-27, 3333-28 and 3333-29.
333323xxxxxxxx
333323xxxxxxxx
1 7
333329xxxxxxxx
333329xxxxxxxx
FT
105P
208P
P
R
O
G
R
A
M
M
I
N
G