How To Enable The Personal Services - FARFISA INTERCOMS FT 105P Installation, Programming, And User's Manual

HOW TO ENABLE THE PERSONAL SERVICES

This procedure allows for enabling the 'do not disturb', 'follow me' and 'timed follow me'
services described on pages 27 and 28.
0 all services are disabled
1 'do not disturb' is enabled
2 'follow me' and 'time follow me' are enabled
3 all services are enabled
Table
Type of service
Enabled services
To program:
pick up the handset (dialling tone);
dial the access code 333316;
- (only FT105P) – dial 5 digits to program 5 extensions (see Table). Always dial a
number of 5 digits even if extensions are less than 5.
- (only FT208P) – dial 8 digits to program 8 extensions (see Table). Always dial a
number of 8 digits even if extensions are less than 8.
wait for the acknowledgement tone and hang up.
Example: if the code below has been dialled:
only the 'do not disturb' service is enabled for extensions 41 and 42
all the services are disabled for extensions 43, 44 and 45
3333 16 1 1 0 0 0 3 2 2
Code Telephones
41 42 43 44 45 46 47 48
3333-16 _
FT105P
FT105P 333316xxxxx
FT208P 333316xxxxxxxx
all the services are enabled for extension 46
only the 'follow me' and 'timed follow me' services are
enabled for extensions 47 and 48
_ _ _ _ _ _
FT208P
1 3
Base
_ 00000 000
FT
105P
208P
P
R
O
G
R
A
M
M
I
N
G