Table of Contents
Advertisement
FT
105P
208P
The PABX must be correctly programmed for the intercom card to work.
Part of the intercom programming is described in the chapter "How to program the
system" on page 14.
I
Select the desired service for each telephone and write the number in the table below.
N
0 the extension: - is not enabled to have conversations with the external intercom station
1 the extension: - is enabled to have conversations with the external intercom station
T
2 the extension: - is not enabled to have conversations with the external intercom station
3 the extension: - is enabled to have conversations with the external intercom station
E
Table
Type of service
R
Day intercom enabling
Night intercom enabling
To program:
C
pick up the handset (dialling tone);
dial the access code 333310 (day) or 333312 (night);
- (only FT105P) – dial 5 digits to program 5 extensions (see Table). Always dial a number
of 5 digits even if extensions are less than 5.
O
- (only FT208P) – dial 8 digits to program 8 extensions (see Table). Always dial a number
of 8 digits even if extensions are less than 8.
wait for the acknowledgement tone and hang up.
M
S
INTERCOM PROGRAMMING
ENABLING THE INTERCOM INTERFACE
- is not enabled to activate relays (door-opener, staircase lighting, etc.)
- is not enabled to activate relays (door-opener, staircase lighting, etc.)
- is enabled to activate relays (door-opener, staircase lighting, etc.)
- is enabled to activate relays (door-opener, staircase lighting, etc.)
Code
3333-10
3333-12
day
FT105P 333310xxxxx
FT208P 333310xxxxxxxx
4 0
Telephones
41 42 43 44 45 46 47 48 Base
_
_
_
_
_
_
_
_
_
_
_
_
FT105P
FT208P
night
333312xxxxx
333312xxxxxxxx
_
_
33333 333
_
_
00000 000
Hide quick links:
Advertisement
Table of Contents
