Answer Upon Call Incoming Tone - FARFISA INTERCOMS FT 105P Installation, Programming, And User's Manual

ANSWER UPON CALL INCOMING TONE

This function allows for answering an incoming call during the conversation.
Operation
In case of call incoming tone during the conversation,
to answer the incoming call:
hang up
- the telephone rings
or
press FLASH to put the other user in hold-on (dialling tone)
dial 9 to start conversation with the calling user
Note
If the calling user is talking with another extension
when dialling 9, hang up and wait for the ring to
resume the previous conversation.
It allows making a call to all extensions – except for extension 48 (FT208P) or 45
(FT105P).
Operation
pick up the handset (dialling tone)
dial 40 (call control tone)
- the call is sent to all extensions, except for extension 48 (FT208P) or 45 (FT105P).
FT105P
FT208P
40
The first extension that picks up the handset starts conversation. The other extensions stop
ringing.
Note
Extension no. 8 for FT208P (or no. 5 for FT105P) does not ring in case of general call, since
it is dedicated to the operation of facsimiles, modems or answering machines.
GENERAL CALL
41 ÷
41 ÷
2 5
Flash+9
44
47
FT
105P
208P
O
P
E
R
A
T
I
45
48
O
N