Caller Id - FARFISA INTERCOMS FT 105P Installation, Programming, And User's Manual

It allows for displaying the calling telephone number on max. 4 devices. The service is
available only in the presence of the optional board art. ES70, upon request to the
telephone provider. For information on how to insert the board, see the instructions manual
supplied with the product.
0 service disabled
1 service enabled
Table
Type of service
Enabling the Caller ID
To program:
pick up the handset (dialling tone);
dial the access code 333316;
- (only FT105P) – dial 5 digits to program 5 extensions (see Table). Always dial a
number of 5 digits even if extensions are less than 5.
- (only FT208P) – dial 8 digits to program 8 extensions (see Table). Always dial a
number of 8 digits even if extensions are less than 8.
wait for the acknowledgement tone and hang up.
Example: if the following code is entered:
33331811010100
- the calling telephone number will only be displayed on extensions 41, 42, 44 and 46.
Notes
The caller ID service will not work if the external lines are programmed for direct
dialling (DISA) (see page 14 for DISA programming).
The maximum number of extensions with the caller ID function is 4. If a higher number
of telephones is enabled during programming, the exchanger will automatically recognise
only the first 4 telephones and exclude the others from the service.

CALLER ID

Code Telephones
41 42 43 44 45 46 47 48
3333-18 _ _ _
FT105P
FT105P 333318xxxxx
FT208P 333318xxxxxxxx
3 3
_ _ _ _ _
FT208P
FT
105P
208P
O
T
H
Base
E
00000 000
R
S
E
R
V
I
C
E
S