How To Program The System - FARFISA INTERCOMS FT 105P Installation, Programming, And User's Manual

FT
105P
208P
This function allows for characterising the operation mode of the PABX (decadic/
multifrequency operation, impulse tone activation/deactivation, duration of intercom call,
DISA activation/deactivation).
P
Table FT208P
R
O
G
R
A
M
M
3333-17 _
Code
To program:
I
pick up the handset (dialling tone);
dial the access code 333317;
dial 8 digits to program the requested general services (see Table). Always dial a
N
number of 8 digits even if some services remain unchanged.
wait for the acknowledgement tone and hang up.
G

HOW TO PROGRAM THE SYSTEM

0 LD dialling of extensions on external line 1
1 DTMF dialling of extensions on external line 1
0 LD dialling of extensions on external line 2
1 DTMF dialling of extensions on external line 2
0 disables warning tone to remind the end of LD dialling time on
external line 1
1 enables warning tone to remind the end of LD dialling time on
external line 1
0 disables warning tone to remind the end of LD dialling time on
external line 2
1 enables warning tone to remind the end of LD dialling time on
external line 2
0 intercom call no. 1 (terminal 6a) lasts 25 sec.
1 intercom call no. 1 (terminal 6a) lasts 5 sec.
_ _ _ _ _
Numbers to be dialled
0 intercom call no. 2 (terminal 6b) lasts 25 sec.
1 intercom call no. 2 (terminal 6b) lasts 5 sec.
0 disables D.I.S.A. over external line 1
1 enables D.I.S.A. over external line 1
0 disables D.I.S.A. over external line 2
1 enables D.I.S.A. over external line 2
_ _ 11000000
Base
1 4