Table of Contents
Advertisement
FT
105P
208P
This function allows for storing and calling 40 telephone numbers by only dialling 4 digits.
Write the chosen numbers (max. 20 digits) in the table on page 47.
O
The access code for this service is 2222.
To program (from extension 41):
T
pick up the handset; dialling tone;
dial the access code 2222;
dial 2 digits from 00 to 39 (directory locations);
H
dial the telephone number to be memorized in the above selected directory location;
hang up.
E
Notes
In case of international calls, insert a pause after each area code. The pause takes up the
place of one digit.
R
To insert a pause, wait for 5 seconds before dialling the next digit.
The dissuasion tone is sent if no digits are dialled within 10 seconds. The number is not
memorized.
Hang up without dialling to delete the last stored number (i.e. dial 222214 and hang up
to cancel directory location 14).
S
Example: to memorize 0058-875-987138 and associate it with directory location 18, dial
2222-18-0058-pause-875-pause-987138.
E
R
Pick up the handset; dialling tone
dial 71
V
dial the two digits of the directory associated with the desired user (from 00 to 39)
The memorized number is automatically dialled always in LD mode. Line tone for a few
seconds to check that the line is free and control tone.
I
Note
Check the presence of the public network tone after the
C
automatic engagement of the external line.
E
Example: select 7118 from any enabled telephone to automatically dial 0058-875-987138
(number of the example above).
S
Note. The dissuasion tone is sent if the PABX directory is dialled from a telephone that is
not enabled to make external calls.
PABX DIRECTORY
HOW TO USE PABX DIRECTORY
3 4
71
Hide quick links:
Advertisement
Table of Contents
