Data Retrieval Mode - Triumph Speed Triple Handbook

General Information

Data Retrieval Mode

1
4
5
3
cfiv_12
1. Lap number
2. Stop watch icon
3. Lap timer
4. Button A
5. Button B
The data retrieval mode can be accessed in
one of two ways:
• With the ignition in the ON position,
from the lap timer display, press
button 'B'.
• From the Data Recording Mode,
with the engine running and the
motorcycle stationary, press the
starter button for 2 seconds. This will
return the display to the 'Lap'
display. From here press button 'B'.
Note:
• The data retrieval mode cannot be
accessed whilst the motorcycle is
in motion.
32
When the data retrieval mode is accessed, the
lap time for the first lap will be displayed. The
lap number will be displayed in the
2
speedometer display position.
1
4
5
cfiv_12
1. Lap number
2. Stop watch icon
3. Lap timer
4. Button A
5. Button B
Press and release button 'A' until the desired
lap (up to a maximum of 50 laps) is
displayed.
Press and release button 'B' to scroll through
the data available in the following order:
• Average Speed (per lap or total of all
laps)
• Maximum
maximum speed achieved)
2
3
Speed (per lap or