General; Steering; Luggage; Brakes - Triumph Speed Triple Handbook

How to Ride the Motorcycle
Warning
The handling characteristics
motorcycle at high speed may vary from
those you are familiar with at legal road
speeds. Do not attempt
operation unless you have
sufficient training and have the required
skills as a serious accident may result from
incorrect operation.
Warning
The items listed are extremely important
and must never be neglected. A problem,
which may not be noticed at normal
operating speeds, may
exaggerated at high speeds.

General

Ensure the motorcycle has been maintained
according to the scheduled maintenance
chart.

Steering

Check that the handlebar turns smoothly
without excessive free play or tight spots.
Ensure that the control cables do not restrict
the steering in any way.

Luggage

Make certain that any luggage containers are
closed, locked and securely fitted to the
motorcycle.
64

Brakes

Check that the front and rear brakes are
functioning properly.
of a

Tyres

High-speed operation is hard on tyres, and
high-speed
tyres that are in good condition are crucial to
received
riding safely. Examine their overall condition,
inflate to the correct pressure (when the tyres
are cold), and check the wheel balance.
Securely fit the valve caps after checking tyre
pressures. Observe the information given in
the Maintenance and Specification sections
on tyre checking and tyre safety.

Fuel

Have sufficient fuel for the increased fuel
consumption that will result from high-speed
be greatly
operation.
In all countries except Australia and New
Zealand the exhaust system is fitted with a
catalytic converter to help reduce exhaust
emission levels. The catalytic converter can
be permanently damaged if the motorcycle
is allowed to run out of fuel or if the fuel
level is allowed to get very low. Always
ensure you have adequate fuel for your
journey.
Caution