Engine Management System Malfunction Indicator Light; Alarm/Immobiliser Indicator Light - Triumph Speed Triple Handbook

General Information
Engine Management System
Malfunction Indicator Light
The malfunction indicator light
for the engine management
system illuminates when the
ignition is switched
indicate that it is working) but should not
become illuminated when the engine is
running.
If the malfunction indicator light becomes
illuminated when the engine is running, this
indicates that a fault has occurred in one or
more of the systems controlled by the engine
management system. In such circumstances,
the engine management system will switch to
'limp-home' mode, so that the journey may
be completed, if the fault is not so severe that
the engine will not run.
Warning
Reduce speed and do not continue to ride
for longer than is necessary with the
malfunction indicator light illuminated. The
fault may adversely affect
performance, exhaust emissions and fuel
consumption. Reduced
performance could cause a dangerous
riding condition, leading to loss of control
and an accident. Contact an authorised
Triumph dealer as soon as possible to have
the fault checked and rectified.
38
Note:
• If the malfunction indicator light
flashes
switched on, contact an authorised
Triumph dealer as soon as possible
on (to to have the situation rectified. In
these circumstances the engine
will not start.

Alarm/Immobiliser Indicator Light

This Triumph model is fitted
with an engine immobiliser
which is activated when the
ignition switch is turned to the
OFF position. If the motorcycle is fitted with
the accessory alarm, the immobiliser will
operate as normal but the alarm/immobiliser
light will operate as described below.
With Alarm Fitted
The alarm/immobiliser
illuminate when the conditions described in
the accessory alarm instructions are met.
Without Alarm Fitted
When the ignition switch turned to the OFF
engine
position, the alarm/immobiliser light will flash
on and off for 24 hours to show that the
engine
engine immobiliser is on. When the ignition
switch is turned to the ON position the
immobiliser and the indicator light will be off.
If the indicator light remains on it indicates
that the immobiliser has a malfunction that
requires investigation. Contact an authorised
Triumph dealer as soon as possible to have
the fault checked and rectified.
when the ignition is
light will only