Setting Gear Change Lights To Off - Triumph Speed Triple Handbook

When the correct setting is shown press
button 'B' and the rpm 100 units start
flashing.
2
3
1
chdo_3
1. RPM 100 units
2. Button A
3. Button B
The setting can now be changed in
increments of 100 rpm, again up to the
maximum rpm limit.
Note:
• In this mode, when 900 is reached,
the next press of button 'A' will
reset the display to 000.
Each individual press of button 'A' will
increase the setting in increments of 100 rpm.
When the correct setting is shown, pressing
button 'B' will confirm the setting, SHIFt will
be visible in the display screen and all the
gear change lights will flash.
Press and release button 'A' until r
visible in the display screen then press
button 'B'. Trip 1 will be visible in the display
screen.
General Information

Setting Gear Change Lights to Off

To select the OFF mode, ensure OFF is visible
in the display screen. Press button 'B' and
SHIFt will be visible in the display screen.
Press and release button 'A' until r
visible in the display screen then press
button 'B'. Trip 1 will be visible in the display
screen.
chdo_5
1. Gear change lights
2. Display screen (OFF mode shown)
turn is
E
turn is
E
1
2
29