Changing Gears - Triumph Speed Triple Handbook

Hide thumbs Also See for Speed Triple:
Table of Contents

Advertisement

How to Ride the Motorcycle

Changing Gears

1
cgez
1. Gear change pedal
Close the throttle while pulling in the
clutch lever. Change into the next
higher or lower gear. Open the throttle
part way, while releasing the clutch
lever. Always use the clutch when
changing gear.
Warning
Take care to avoid opening the throttle too
far or too fast in any of the lower gears as
this can lead to the front wheel lifting from
the ground (pulling a 'wheelie') and to the
rear tyre breaking traction (wheel spin).
Always
open
the
throttle
particularly if you are unfamiliar with the
motorcycle, as a 'wheelie' or loss of traction
will cause loss of motorcycle control and an
accident.
58
Note:
The gear change mechanism is the
'positive stop' type. This means
that, for each movement of the
gear change pedal, you can only
select each gear, one after the
other, in ascending or descending
order.
Do not change to a lower gear at speeds
that will cause excessive engine rpm
(r/min). This can lock the rear wheel
causing loss of control and an accident.
Engine damage may also be caused.
Changing down should be done such that
low engine speeds will be ensured.
cautiously,
Warning

Advertisement

Table of Contents
loading

This manual is also suitable for:

Speed triple r

Table of Contents