General Information; Speedometer And Odometer; Tachometer; Trip Computer - Triumph Speed Triple Handbook

Hide thumbs Also See for Speed Triple:
Table of Contents

Advertisement

Speedometer and Odometer

The digital speedometer indicates the road
speed of the motorcycle. The read-out
displays the motorcycle road speed in
increments of one kilometre (or mile) per
hour.
The electronic odometer and two trip meters
are in the display screen. For details of the
operation of the odometer and trip meters,
please refer to the following pages.

Tachometer

The tachometer shows the engine speed in
revolutions per minute - rpm (r/min). At the
end of the tachometer range there is the
'red zone'. Engine rpm (r/min) in the red
zone is above maximum recommended
engine speed and is also above the range for
best performance.
Caution
Never allow engine rpm to enter the
'red zone' as severe engine damage may
result.

General Information

Trip Computer

2
1
cfio_12
1. Display screen
2. Button A
To access the trip computer information press
and release button 'A' until the desired
display is visible. The display will scroll
through in the following order:
Trip Meter 1;
Trip Meter 2;
Lap Timer;
Tyre Pressure Monitoring system -
if fitted;
Set up.
Note:
The lap timer (lap) will only be
displayed if it is turned on in set up
(see page 30).
The
tyre
pressure
system (TPMS) is an accessory
which must be fitted by your
authorised Triumph dealer. The
TPMS
display
will
activated
by
your
Triumph dealer.
monitoring
then
be
authorised
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Speed triple r

Table of Contents