Ignition Key - Triumph Speed Triple Handbook

Hide thumbs Also See for Speed Triple:
Table of Contents

Advertisement

General Information
The tyre pressure at which the warning light
illuminates is temperature compensated to
20°C but the numeric pressure display
associated with it is not (see page 36). Even if
the numeric display seems at or close to the
standard tyre pressure when the warning
light is on, a low tyre pressure is indicated
and a puncture is the most likely cause.
Warning
Stop the motorcycle if the tyre pressure
warning light illuminates. Do not ride the
motorcycle until the tyres have been
checked and the tyre pressures are at their
recommended pressure when cold.
40

Ignition Key

ceom
1. Key number tag
In
addition
to
operating
lock/ignition switch, the ignition key is
required to operate the seat lock and fuel
tank cap.
When the motorcycle is delivered from the
factory, two keys are supplied together with a
small tag bearing the key number. Make a
note of the key number and store the spare
key and key number tag in a safe place away
from the motorcycle.
A transponder is fitted within the key to turn
off the engine immobiliser. To ensure the
immobiliser functions correctly, always have
only one of the ignition keys near the ignition
switch. Having two ignition keys near the
switch may interrupt the enable signal
between the transponder and the engine
immobiliser. In this situation the engine
immobiliser will remain on until one of the
ignition keys is removed.
1
the
steering

Advertisement

Table of Contents
loading

This manual is also suitable for:

Speed triple r

Table of Contents