New Lap Recording
1
ccmh_1
1. Starter button
At the end of the lap, pressing the starter
button again will register the start of a new
lap. The display will show the last lap time for
5 seconds, then the new lap number for
5 seconds. After this time, the speedometer
display will show the current lap number and
the display screen will show the current lap
time.
General Information
Data Retrieval Mode
1
4
5
3
cfiv_12
1. Lap number
2. Stop watch icon
3. Lap timer
4. Button A
5. Button B
The data retrieval mode can be accessed in
one of two ways:
•
With the ignition in the ON position,
from the lap timer display, press
button 'B'.
•
From the Data Recording Mode,
with the engine running and the
motorcycle stationary, press the
starter button for 2 seconds. This will
return the display to the 'Lap'
display. From here press button 'B'.
Note:
•
The data retrieval mode cannot be
accessed whilst the motorcycle is
in motion.
2
31