Changing The Set Speed - Triumph Speed Triple Handbook

General Information
Note:
• The motorcycle is delivered from
the factory with the gear change
light set to the 6 LED mode at
3,500 rpm.
1
3
4
2
chdo_2
1. Gear change lights
2. Display screen (3 mode shown)
3. Button A
4. Button B
28
When the gear change light mode has been
selected, the tachometer needle will move
round to the last set position. The rpm will be
shown in the display screen with the
1,000 units flashing.
2
3
1
chdo_3
1. RPM 1,000 units
2. Button A
3. Button B

Changing the Set Speed

To change the setting in increments of
1,000 rpm, press button 'A'. Each individual
press of button 'A' will then increase the
setting in increments of 1,000 rpm, up to the
maximum rpm limit. When the maximum
rpm limit is reached, the setting will return to
3,500 rpm.
Note:
• If the rpm 1,000 units is set to the
maximum rpm limit, SHIFt will be
shown.