Data Retrieval Mode - Triumph Daytona 675 Handbook

New Lap Recording
1
ccpc1
1. Starter button
Each new lap is recorded by a brief press of
the starter button (with the engine running
only). Whilst in the data recording mode,
pressing the starter button for 2 seconds will
return the display to the lap timer. From the
lap timer display, press the 'Set' button to
enter the Data Retrieval Mode.
General Information

Data Retrieval Mode

4
2
0
1
3
1. Lap time
2. Lap number
3. Set button
4. Trip button
Accessing the Data Retrieval Mode
The Data Retrieval Mode can be accessed in
one of two ways:
• With the ignition in the ON position,
from the lap timer display, press the
'Set' button.
• From the Data Recording Mode,
with the engine running and the
motorcycle stationary, press the
starter button for 2 seconds. This will
return the display to the 'LAP'
display. From here press the 'Set'
button.
The Data Retrieval Mode cannot be accessed
whilst the motorcycle is in motion.
8
6
10
1
-1
MIN x 1000
2
4
29