Changing The Set Speed - Triumph Speed Triple Handbook

General Information
When the gear change light mode has been
selected, the tachometer needle will move
round to the last set position. The rpm will be
shown in the display screen with the
1,000 units flashing.
2
3 1
cgfr_3
1. RPM 1,000 units
2. Button A
3. Button B

Changing the Set Speed

To change the setting in increments of
1,000 rpm, press button 'A'. Each individual
press of button 'A' will then increase the
setting in increments of 1,000 rpm, up to the
maximum rpm limit. When the maximum
rpm limit is reached, the setting will return to
3,500 rpm.
Note:
• If the rpm 1,000 units is set to the
maximum rpm limit, SHIFt will be
shown.
28
When the correct setting is shown press
button 'B' and the rpm 100 units start
flashing.
2
3 1
cgfr_4
1. RPM 100 units
2. Button A
3. Button B
The setting can now be changed in
increments of 100 rpm, again up to the
maximum rpm limit.
Note:
• In this mode, when 900 is reached,
the next press of button 'A' will
reset the display to 000.
Each individual press of button 'A' will
increase the setting in increments of 100 rpm.
When the correct setting is shown, pressing
button 'B' will confirm the setting, SHIFt will
be visible in the display screen and all the
gear change lights will flash.
Press and release button 'A' until r
visible in the display screen then press
button 'B'. Trip 1 will be visible in the display
screen.
turn is
E