Chapter 3 - Installing Devices; Removing The Chassis Cover - DFI KS150-BT User Manual

Chapter 3 - Installing Devices

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it have been powered-
off.
2. Disconnect all power cords and cables.
3. The 8 mounting screws on the back side of the system are used to secure the cover to the
chassis. Remove these screws and then put them in a safe place for later use.
4. After removing the mounting screws, lift the cover up.
Lift the Cover Upward
Chapter 3 Installing Devices
Chapter 3
5. The SODIMM sockets, Mini PCIe slot and SATA drive bay are readily accessible after remov-
ing the chassis cover.
SATA drive bay
Mounting Screw
11
Mini PCIe slot
SODIMM sockets
www.dfi .com