Table of Contents
Advertisement
COM (Serial) Ports
2
COM 2
9
1
COM 3
COM 4
COM 2/COM 3/COM 4:
RS232
COM 2 to COM 4 are fixed at RS232.
The pin functions of COM port 1 will vary according to JP8's, JP9's and JP11's setting. JP14 is
used to configure the Serial COM port 1 to pure RS232 or RS232 with power. Refer to "COM 1
RS232/422/485 Select" and "COM 1 RS232/Power Select" in this chapter for more information.
The serial ports are asynchronous communication ports with 16C550A-compatible UARTs that
can be used with modems, serial printers, remote display terminals, and other serial devices.
Connecting External Serial Ports
Your COM port may come mounted on a card-edge bracket. Install the card-edge bracket to
an available slot at the rear of the system chassis then insert the serial port cable to the COM
connector. Make sure the colored stripe on the ribbon cable is aligned with pin 1 of the COM
connector.
BIOS Setting
Configure the serial COM ports in the Advanced menu ("Super IO Configuration" submenu) of
the BIOS. Refer to the chapter 7 for more information.
Chapter 5 Ports and Connectors
Chapter 5
COM 1:
2
RS232/422/485
1
9
Important:
When COM 1 RS232/422/485 is selected, JP9 and JP11 must be set in accordance to
JP8.
30
www.dfi .com
Advertisement
Table of Contents
