Disposal Of The Machine; Ordering Numbers - Kemppi MasterTig MLS 2500 Operation Instructions Manual

Power source overheat indicator light is lit.
Power source is overheated.
• Check that there is enough free space behind the machine for cooling air circula-
tion.
• Check cooling unit for water circulation, clean cooling unit filter and air grate. Add
cooling liquid if necessary.
For further information and assistance, contact your nearest Kemppi service workshop.

4.3. DISPOSAL OF THE MACHINE

Kemppi machines are produced mainly of recyclable materials. Please deliver an old machine
to be removed from service to a treatment plant where it is possible to separate the materials for
recycling.

4.2. ORDERING NUMBERS

Master 2500 MLS
Master 2503 MLS
Welding cable 35mm², 2,5 m
Earth cable 25mm², 2,5 m
Electric plug 16 A, 5-poles
Master 3500 MLS
Master 3503 MLS
Welding cable 50mm², 2,5 m
Earth cable 50mm², 2,5 m
Electric plug 16 A, 5-poles
Mastertig 2500 MLS
Mastertig 2503 MLS
Torches
TTC 160 4m
TTC 160 8m
TTC 160 16m
TTC 220 4m
TTC 220 8m
TTC 220 16m
Earth cable 35mm², 5 m
Electric plug 16 A, 5-poles
Gas flow meter AR/clock
Mastertig 3500 MLS
Mastertig 3503 MLS
Torches
TTC 160 4m
TTC 160 8m
TTC 160 16m
©
COPYRIGHT KEMPPI OY
6104250
6102250
6184301
6184311
9770812
6104350
6102350
6184501
6184511
9770812
6114250
6112250
627016004
627016008
627016016
627022004
627022008
627022016
6184311
9770812
6265136
6114350
6112350
627016004
627016008
627016016
Master(tig) 2500, 2503, 3500, 3503 MLS™/ 0311 – 19