Installation; Removal From Packaging; Locating The Machine; Serial Number - Kemppi MasterTig MLS 2500 Operation Instructions Manual

Welding power circuit
Isolate yourself by using proper protective clothing, do not wear wet clothing. Never work on a
wet surface or use damaged cables. Do not put TIG torch or welding cables on welding machine
or on other electric equipment. Do not press TIG torch switch if the torch is not directed towards
the work piece.
Welding fumes
Take care that there is sufficient ventilation during welding. Take special safety precautions
when welding metals which contain lead, cadmium, zinc, mercury or beryllium.
Lifting the equipment
Always remove gas bottle before lifting.

2. INSTALLATION

2.1. REMOVAL FROM PACKAGING

The equipment is packed in durable packages designed especially for it. However, it is neces-
sary to check the equipment before using it to make sure that the equipment or any part of it has
not got damaged during transportation. Also check that the delivery corresponds to your order
and that you have received all necessary instructions for installing and operating the equipment.
The packaging material is recyclable.

2.2. LOCATING THE MACHINE

Place the machine on a horizontal, stable and clean ground. Protect the machine from rain and
direct sunshine. Check that there is enough space for cooling air circulation in front of and
behind the machine.

2.3. SERIAL NUMBER

Serial number of the machine is marked on the rating plate. The serial number is the only proper
means of identifying parts for a specific product. It is important to make correct reference to the
serial number of the product when making repairs or ordering spare parts.

2.4. INSTALLATION AND MAIN PARTS

4
6
4 – Master(tig) 2500, 2503, 3500, 3503 MLS™/ 0311
1
Front of machine
1. Function panel
2. Remote control connector
3. TIG torch control connector, not in MMA version
4. Shield gas and current connector for TIG torch, not in MMA
version
5. (+) connector for electrode holder or earth cable, in TIG weld-
ing for earth cable
2
6. (-) connector for earth cable or electrode holder in MMA
welding (stick welding)
3
Markings for (+/-) poles on the machine front are embossed.
5
©
COPYRIGHT KEMPPI OY