Conference Unit Startup Mode - Shure Microflex Complete Wireless MXCW Complete User Manual

All connected microphones automatically update to the new network.
To update any other devices:
1. Open the technician menu on the MXCW640 by tapping the
volume control knobs and tap the right side of the screen.
2. Go to the wireless tab.
3. Depending on the Startup mode set on the unit, either scan for a network or view options in the list.
4. Choose an access point network and press Connect .
To combine rooms again, simply change the conference units back to the original network to create the larger system.

Conference Unit Startup Mode

Set the Startup Mode to determine how MXCW conference units connect to the access point after powering on.
Access the technician menu on the conference unit by tapping the
volume control knobs and tap on the right side of the screen. Choose one of the following Startup Modes:
Last Connected (default)
List
Scan
Tip: When choosing the network manually, the list indicates the last connected access point with a star.
Connected Network Name
The device displays the connected network from the toolbar.
Automatically selects the network it was last connected to before powering down. New or
factory default devices use this setting to access the SSID 00 by default.
Manually choose from a prepopulated list of networks. To update the list with custom names,
rename the SSID labels in the web application and push the list to the registered wireless
devices.
The device scans for available access point networks and ranks them with strongest signal
at top, and weakest at the bottom. Manually select the network from the list.
gear icon. While at the top of the page, hold down the
gear icon. While at the top of the page, hold down both
Shure Incorporated
42/101